Cart Contents     |     Checkout

Paypal

Treasure Hunter Vision 3030

Treasure Hunter Vision 3030

Price: $536.00 $137.00

Available Options:

Packages:
Reviews

Because you asked for it!

Inspiring. Incredible. Amazing. A young girl’s metal detecting success story with her Treasure Hunter Vision 3030 from a couple of years back!

Armed with nothing but her Treasure Hunter Vision 3030, her 3rd grade education, her boundless curiosity, and quiet determination, this 8-year old blew seasoned detectorists out of the water with her haul over a three-month hunting season.

My Grandaughter, this Spring has been detecting with me most days for the last 3-months. The beach here can be a lucrative spot, in the mornings and late afternoons, so there are usually a number of other hunters. She has consistently gone behind myself and other Metal Detectorists with the 3030 metal detector that I purchased for her, and picked up valuable target after target right behind myself and my friends with our thousand dollar machines. She found two large carat diamond rings, her total cache by the end of the holiday was over 50k - Not too bad for an 8yr old girl.

Perry Stewart, Miami South Beach

PRESS

The following is a review of Treasure Hunter’s Vision 3030 and Vision-Pro

Review By Lost Treasure Magazine

The All-Vision Pro & MD-3030 detectors have been designed to provide features sought by today's treasure hunters. For example, visual target ID is a feature many coin and beach hunters find extremely useful but is typically not found on sub-$200 detectors. Treasure Hunter incorporated this as well as other features such as depth reading, tone target ID and "turn-on-and-go" operation into their detectors while keeping a tight reign on the over-all price.

Both units tested include VLF circuitry, an LCD display with target ID indication, a waterproof 8" coil, 1/8" headphone jack and use 2 9-V batteries. Discriminate and All-Metal search modes are found on both models, with the MD-3030 also having a Notch search mode. The search coil is hard-wired into the control housing on the All-Vision Pro and removable on the MD-3030 (this allows optional coils to be sued when they are available in the future).

The most obvious difference between the two models is the shaft/housing design. The MD-3030 uses a straight shaft with a handgrip on the housing and an adjustable armrest. The shaft length is adjustable by turning the collar in sliding the two-pieces to the desired length. The All-Vision Pro uses the more familiar S-rod with the control housing mounted on the shaft just in front of the handgrip. The shaft length is adjustable through a locking collar/spring-clip system. Both designs serve their function - selecting one is a matter of personal preference.

The MD-3030 is controlled by 7 touch pads on the control housing, an ON/OFF switch, and a volume control. There are three search modes - All Metal, Discriminate and Notch - selected through the 3 mode touch pads. Sensitivity is adjusted by pressing the SENS touch pad and then using the UP/DOWN touch pads. The Discriminate and Notch controls work a bit differently than on other detectors. When you switch to the DISC mode, maximum discrimination/rejection is in effect (appears as a single black segment on the far right side of the display). At this setting only copper, clad or silver coins (and targets of similar properties) will produce an audio/visual signal. To accept more targets, press the UP touch pad to add additional black segments beneath the types of targets you are interested in finding. Remember that as more target types are accepted, you will wind up digging more trash as well as good targets. Use the discrimination circuit to eliminate most of the trash in a given area so that you can find more good targets in a given amount of time.

The MD-3030 also features a 3-tone target ID system in which iron, foil, nickels and some jewelry produce a low tone; most rings, pull tabs, screw caps and zinc pennies a medium tone; and coins and silver jewelry a high tone.This is a nice feature especially if you are hunting in dim or no light conditions such as on a beach after the crowds have left and you cannot see the LCD display.

The All-Vision Pro is simplicity itself in that in only has two knobs to adjust. The DETECTION DEPTH control turns the detector on and adjusts the units' power output or sensitivity. The TRASH ELIMINATION control is used to select what targets are accepted and which are rejected. The LCD display provides the probable ID of detected targets, battery condition and a dual-segment pinpointing system (segments come in from both edges of the meter and when they come the closest together, the target is directly beneath the center of the coil).

Field Test

The timing for this field test worked out perfectly as the detectors arrived the day before I flew back up to Pennsylvania. My son Paul, who has been my detecting partner since he was old enough to walk and has become quite a proficient hunter in his own right, wanted to get involved in conducting this field test so we sat down and read over the instruction manual.

We opted to go to a large public park nearby with a section for children called "KidsBurg" which had the usual assortment of climbing equipment, swings and slides in a wood chip base which would target recovery a snap. As we unloaded the detectors from the car we noticed someone else from the local club already hunting the area. Paul turned the MD-3030 on, selected the DISC mode and adjusted the discrimination to accept everything other than Iron and Foil. Signals were not plentiful; however, the MD-3030 did ferret out several coins at depths down to 7". Pinpointing was accomplished by "wiggling" the coil over the area where a detected target was found and watching the depth indication on the LCD display. When the shallowest indication was received, the target was under the center of the coil. Practicing this at home on targets you've buried in the yard will payoff in terms of being able to recover targets in the field faster and with less damage to the area you are hunting in. We spent an hour or so at this location and picked up a number of coins - some had obviously been there a while and missed by other detectorists showing that no place is ever worked out.

Returning to South Carolina, I took both detectors to several local parks and schools to see what might turn up. There hasn't been much rain lately so I stuck to the areas with sand, gravel or wood chips to make target recovery easier. Alternating between the two detectors and in some cases comparing signals, I spent several hours hunting these sites. Coins were recovered in each location, and most cases, very little trash turned up due to a combination of discrimination setting and checking the target ID reading before recovering targets.

Summary

The current line of (Treasure Hunter) metal detectors won't replace your top-of-the-line detector but that was never their goal. They provide affordable detectors ranging from $89 to $599. Their metal detectors are great for the beginner and some of the more advanced models provide room for growth as well as making a great replacement unit to your primary detector. Both come with a 5-year warranty.

Be sure to mention that you read about their detectors in Lost Treasure!

What makes the 3030 metal detector so powerful? Good Question, this metal detector is equipped with Treasure Hunter’s patented Z-100 microprocessor that is able to discriminate iron from silver at depths exceeding 9 inches.

The Vision 3030, has full spectrum discrimination with the added function of disc/notch - select for or against ranges in phase response. In other words, you can set the detector to only detect silver, or only detect copper, etc., etc.

The oversized LCD screen provides target ID, as well as target depth readout. Because of the powerful Z-100 processor, the Vision 3030 metal detector has better discrimination at greater depths than almost any other metal detector in the same price range.

The beloved 3030 by Treasure Hunter amazing depth and discrimination accuracy continues to astonish experts by their remarkable performance, every time.

We have a very limited number of TH Vision 3030 metal detectors available with the "Accessory Package A." Due to the high demand for these highly accurate, easy to use, deep-search metal detectors, we have only a very small number left in stock and, unfortunately, because Treasure Hunter cannot keep up with demand, they will be sold out way before Christmas this year. 

Do not get left behind; once they are gone, they are gone...

  • Features in Detail:
    • Our Most Popular Metal Detector
    • Three Operation Modes: All metal (detects all metals), Disc.(to discriminate for or against metal type), Notch (to eliminate some objects)
    • Selectable Target Detection/Rejection Combined With Depth (Surface Elimination)
    • Lightweight (2.5lbs) for Comfortable Easy Use
    • Z-100 -16bit Microprocessor
    • Programmable Sensitivity Adjustment
    • (VLF) Operating Frequency ~ 6.55-6.75Khz
    • (AGB) Auto Ground Balancing
    • Standard Headphone Jack
    • Intuitive Large Touchpad Controls
    • Target Image Indication With Very Large LCD
    • LCD Can Display Target Depth, Identify metal type or coin/ring, Disc/Notch Setting.
    • Three Distinctive Audible Tones For Different Metals
    • Low Battery Consumption and Auto Low Battery Indication LED
    • Telescoping Handle, Sleek Comfortable Design
    • Waterproof 8" Searchcoil
    • Water Resistant Case and Body
    • Standard Headphone Jack
    • Uses 2-9V Batteries - Not Included
    • Accessory Package (A) Included

Unable to display content. Adobe Flash is required.

5-Year Manufacturers Warranty

Recently Viewed Products

Treasure Hunter Vision XJ9

Treasure Hunter Vision XJ9

Treasure Hunter Navigator

Treasure Hunter Navigator

Treasure Hunter XJ9-3050

Treasure Hunter XJ9-3050

Treasure Hunter Private Eye

Treasure Hunter Private Eye

Treasure Hunter Voyager

Treasure Hunter Voyager

Piwik E-Commerce Analytics for OSC